Understanding the energy loss in piezoelectric materials is of significant importance for
manufacturers of acoustic transducers. The contributions to the power dissipation due to …

Based on contact heat transfer, a novel method to increase power density of piezoelectric
transformers is proposed. A heat transfer structure is realized by directly attaching a …

3 piezoelectric composites have been widely used in transmitting transducers, medical
devices, navigation, aerospace, etc. However, due to poor thermal conduction of inside …

This paper describes the mechanism of heat generation in lossy 1–3 piezoceramic-polymer
composite active layer of ultrasonic transducers excited at different voltages at resonance …

High power Langevin piezoelectric transducers have large dielectric and piezoelectric
losses. Most of these losses are converted into accumulating internal heat that increases the …

The objective of this study was to increase the output current and power in a piezoelectric
transformer (PT)-based DC/DC converter by using a cooling system. It is known that the …

Scanning Probe Microscopy (SPM) imaging process is inherently slow, and commonly
suffers from instrumental drift. According to experience, drift is a time dependent …

(1. 中国科学院苏州生物医学工程技术研究所, 江苏苏州215163; 2. 中国科学院大学,
北京100049) 摘要: 压电变压器的散热问题限制了其在高功率场合的应用 …

Considering the case of large current (> 1A), the piezoelectric transformer (PT) easily
becomes unstable or even crack with temperature rise because of the excessive internal …

The objective of this study was to increase the output current and power in a piezoelectric
transformer (PT) based DC/DC converter by adding a cooling system. It is known that the …