[HTML][HTML] An overview of the machinability of alloy steel
Machinability is an important aspect for the machining of any materials. In general, it is
controlled by means of tool life, surface roughness, power consumption, chip morphology …
controlled by means of tool life, surface roughness, power consumption, chip morphology …
Enhancing the microstructure and properties of titanium alloys through nitriding and other surface engineering methods
A Zhecheva, W Sha, S Malinov, A Long - Surface and Coatings technology, 2005 - Elsevier
Over the last 40 years, the commercial production of titanium and its alloys has increased
steadily. Whilst these materials have some very attractive properties, enabling applications …
steadily. Whilst these materials have some very attractive properties, enabling applications …
Anisotropic response of Ti-6Al-4V alloy fabricated by 3D printing selective laser melting
The 3D printed bulk samples fabricated by selective laser melting (SLM) of the additive
manufacturing technique are usually considered to be 3D isotropic in microstructures and …
manufacturing technique are usually considered to be 3D isotropic in microstructures and …
Evaluation of microstructural development in electron beam melted Ti-6Al-4V
A Safdar, LY Wei, A Snis, Z Lai - Materials characterization, 2012 - Elsevier
In the current work an investigation of the microstructures of EBM built Ti-6Al-4V test bars
has been performed using OM, SEM, TEM and XRD. It has been found that the prior β …
has been performed using OM, SEM, TEM and XRD. It has been found that the prior β …
Microstructure and tensile properties of additive manufactured Ti-6Al-4V with refined prior-β grain structure obtained by rapid heat treatment
Heat treatments tailored for additive manufactured Ti-6Al-4V can be used to attain desirable
microstructures associated with superior mechanical properties. Rapid heat treatments, for …
microstructures associated with superior mechanical properties. Rapid heat treatments, for …
A comprehensive study on the fatigue properties of duplex surface treated Ti6Al4V by plasma nitriding and DLC coating
This study aims to investigate the effects of duplex surface treatment consisting of plasma
nitriding and DLC coating on the fatigue properties of Ti6A4V alloy. For this investigation …
nitriding and DLC coating on the fatigue properties of Ti6A4V alloy. For this investigation …
Microstructure and mechanical properties of open-cell porous Ti-6Al-4V fabricated by selective laser melting
The open-cell porous Ti-6Al-4V structure, intended to be applied as replacement for human
cortical and cancellous bone, are fabricated by selective laser melting (SLM). The computer …
cortical and cancellous bone, are fabricated by selective laser melting (SLM). The computer …
Investigation on the corrosion behavior and biocompatibility of Ti-6Al-4V implant coated with HA/TiN dual layer for medical applications
M Kazemi, S Ahangarani, M Esmailian… - Surface and Coatings …, 2020 - Elsevier
Abstract Ti-6Al-4V alloy has wide applications in the medical industry due to its unique
mechanical properties and biocompatibility. However, in the long-term use of these alloys …
mechanical properties and biocompatibility. However, in the long-term use of these alloys …
Sliding wear of titanium nitride thin films deposited on Ti–6Al–4V alloy by PVD and plasma nitriding processes
D Nolan, SW Huang, V Leskovsek, S Braun - Surface and Coatings …, 2006 - Elsevier
Considerable progress has been made in improving the tribological properties of titanium
alloys by application of surface engineering technologies such as physical vapour …
alloys by application of surface engineering technologies such as physical vapour …
Plasma nitriding behavior of Ti6Al4V orthopedic alloy
The influence of plasma nitriding on mechanical, corrosion and tribological properties of
Ti6Al4V has been investigated using X-ray diffraction, microhardness tester, scanning …
Ti6Al4V has been investigated using X-ray diffraction, microhardness tester, scanning …