Mechanistic-based constitutive modeling of oxidative aging in aging-susceptible materials and its effect on the damage potential of asphalt concrete

RKA Al-Rub, MK Darabi, SM Kim, DN Little… - … and Building Materials, 2013 - Elsevier
Oxidative aging is one of the most important factors in reducing the fatigue damage
resistance of aging-susceptible materials such as bituminous materials and asphalt …

Overlay tester: simple performance test for fatigue cracking

F Zhou, S Hu, DH Chen… - Transportation Research …, 2007 - journals.sagepub.com
It is well known that fatigue cracking is not just a material problem; it also correlates highly
with pavement structure and environmental and traffic conditions. This unique characteristic …

Research on Fatigue–Healing Performance of Asphalt Mixture Based on the Semicircular Bending Test

L Wang, P Cheng, Q Zhao - Materials, 2023 - mdpi.com
In order to study the self-healing performance of macroscopic fractures of asphalt mixtures,
semicircular bending (SCB) tests were used to test 90# base asphalt mixtures, SBS (Styrene …

Reinforcing overlay to reduce reflection cracking; an experimental investigation

S Fallah, A Khodaii - Geotextiles and Geomembranes, 2015 - Elsevier
This study examines the influence of the most important parameters on delaying reflection
cracking in geogrid reinforced overlay in bending mode, employing a large scale …

Investigation of thermal asphalt mastic and mixture to repair potholes

J Li, J Liu, W Zhang, G Liu, L Dai - Construction and Building Materials, 2019 - Elsevier
Asphalt pavements maintenance is a critical infrastructure issue. This paper reports on a
high thermal conductivity asphalt pavement mastic and mixture. Thermal asphalt mortar …

Comparison of permeable friction course mixtures fabricated using asphalt rubber and performance-grade asphalt binders

AE Alvarez, EM Fernandez, AE Martin, OJ Reyes… - … and Building Materials, 2012 - Elsevier
Permeable friction course mixtures (PFC) are special hot mix asphalt (HMA) mixtures that
are designed to improve motorist safety and reduce traffic noise (ie, tire–pavement noise). In …

Viscoelastic modelling of an asphalt pavement based on actual tire-pavement contact pressure

T Bai, Z Cheng, X Hu, L Fuentes… - Road Materials and …, 2021 - Taylor & Francis
A three-dimensional finite element (3-D FE) modelling was conducted based on non-uniform
distributed tire-pavement contact pressure, full interfacial layer bonding conditions, and …

Research on Water Stability and Moisture Damage Mechanism of a Steel Slag Porous Asphalt Mixture

X Chen, M Zhang, J Yao, X Zhang, W Wen, J Yin… - Sustainability, 2023 - mdpi.com
A steel slag porous asphalt (SSPA) mixture, as the surfacing layer of permeable asphalt
pavements, not only ensures the pavement surface drainage and noise reduction functions …

Evaluating and comparing different methods and models for generating relaxation modulus master-curves for asphalt mixes

LF Walubita, AE Alvarez, GS Simate - Construction and Building Materials, 2011 - Elsevier
Based on a master-curve, mixture properties can be predicted or interpolated at different
temperatures and loading times of interest from a limited set of laboratory test data. This …

Laboratory assessment of the performance and elastic behavior of asphalt mixtures containing steel slag aggregate and synthetic fibers

AM Alnadish, MY Aman, HYB Katman… - International Journal of …, 2021 - Springer
This study focused on the assessment of the performance of fiber-modified asphalt mixtures
containing steel slag aggregates. The asphalt mixtures incorporating coarse steel slag …