The hot workability of conventional titanium alloys and titanium aluminides is reviewed. For
both alloy classes, the influence of hot working variables and microstructure on failure via …

Extensive research during the last eight years has resulted in the development and
improvement of second-generation gamma alloys of engineering importance, Ti-48Al-2 (Cr …

Derived from the highly acclaimed series Materials Science and Technology, this book
covers the properties as well as the present and emerging applications of intermetallics …

The hot deformation and dynamic recrystalliztion (DRX) behavior of a high Nb containing
TiAl alloy were studied using hot uniaxial compression tests. The tests were conducted at …

The correlation between hot deformation parameters and the workability of β-stabilized Ti–
45Al–7Nb–0.4 W–0.15 B (at.%) alloy was studied in the temperature range 1000–1200° C …

The characteristics of hot deformation behavior and associated microstructural development
of a cast γ-TiAl based Ti-45Al-8Nb-2Cr-0.2 B (at.%) alloy have been investigated in the …

The creep properties of a powder-metallurgy Ti–46.5 Al–2Cr–2Nb–0.8 Mo–0.2 W–0.2 Si
(at%) alloy containing beta phase were investigated. Tensile creep experiments were …

The microstructural evolution and creep behavior of the Ti-43.5 Al–4Nb–1Mo-0.1 B alloy
have been investigated by scanning electron microscope (SEM) and transmission electron …

Superplasticity in a powder metallurgy (P/M) TiAl alloy (Ti–47Al–2Cr–1Nb–1Ta) with a
metastable B2 phase coexisted with a fine-grained γ+ α2 duplex structure has been studied …

This monograph is based on the fundamental aspects as well as the results of decades of
research related to structure, processing, mechanical properties, and resistance to …