This study aims to investigate the correlation between the microstructure and corrosion
behaviour of AZ series alloys, using analytical scanning electron microscopy, X-ray …

This study investigates Ca-Y microalloying to address macro-segregation and enhance
corrosion resistance in twin-roll cast Mg-Al-Mn alloys. Ca-Y microalloying alleviates macro …

Abstract The influence of Al–Mn intermetallic on corrosion resistance of AM50 alloy was
investigated. TEM-SAED was utilized to identify microstructure and composition of the …

With the increase in studies on high-entropy alloys and their impressive structural properties,
the preparation processes and applications of high-entropy alloys have become a popular …

Abstract In hypoeutectic Mg-Al-based alloys, Mg 17 Al 12 forms in the last stages of
solidification by a eutectic reaction that is usually fully or partially divorced. Here we …

The mechanical properties of as-extruded AZ80 magnesium alloy at temperatures of 450–
525° C and strain rates of 3.0 s− 1 and 0.15 s− 1 were investigated by tensile tests. Zero …

To solve the problem of the influence of Ti particles on Al 8 Mn 5 phases is difficult to
observe from the experiments, the effects of Al 8 Mn 5 doped with Ti atom at different Wyckoff …

In this study, a Mg-0.9 Al-0.6 Mn-0.2 Si-0.1 Ca alloy (in as-cast form) has been subjected to
homogenization treatment followed by different thermomechanical processing, namely hard …

In this study, a new modified tube cyclic expansion extrusion process named M-TCEE was
utilized for producing tubes with ultrafine grained (UFG) microstructure and improved …

This study aimed to enhance the corrosion resistance of an Al-Mn-Zr alloy containing Fe
impurities by using heat-treatment processes. Three processes were implemented to …