Deformation and strengthening of SiC reinforced Al-MMCs during in-situ micro-pillar compression
AK Basak, A Pramanik, C Prakash - Materials Science and Engineering: A, 2019 - Elsevier
This study investigates the deformation of Al-based metal matric composites (MMCs) under
in-situ micro-pillar compression. Different sizes of SiC nanoparticles, namely 55 nm and 700 …
in-situ micro-pillar compression. Different sizes of SiC nanoparticles, namely 55 nm and 700 …
Micro-mechanical behaviour of selective laser melted Ti6Al4V under compression
The mechanical properties and deformation behaviour of a selective laser melted (SLMed)
Ti6Al4V alloy were investigated at the micro-scale via in situ micro-pillar compression. The …
Ti6Al4V alloy were investigated at the micro-scale via in situ micro-pillar compression. The …
Understanding the micro-mechanical behaviour of recast layer formed during WEDM of titanium alloy
In the course of wire electro-discharge machining (WEDM), the unavoidable and
undesirable formation of a recast layer on titanium (Ti) alloy was observed to have taken …
undesirable formation of a recast layer on titanium (Ti) alloy was observed to have taken …
Microstructure and micro-mechanical properties of friction stir processed Al 5086-based surface composite
The present research work investigates the microstructure and mechanical properties of
friction stir processed aluminium alloy 5086 based surface composite at micro-level …
friction stir processed aluminium alloy 5086 based surface composite at micro-level …
Strength of a 3D printed Al 7068 alloy under micro-pillar compression
The present work investigates the mechanical properties of as-built laser powder bed fusion
(L-PBF) Aluminium 7068 alloys, together with microstructural characterization. To achieve …
(L-PBF) Aluminium 7068 alloys, together with microstructural characterization. To achieve …
Compressive strength and deformation behavior of the hybrid S phase layer under micro-pillar compression
Austenitic stainless steel of medical grade was subjected to low-temperature
thermochemical heat treatment process which forms a distinctive layer on the surface of the …
thermochemical heat treatment process which forms a distinctive layer on the surface of the …
Achieving Exceptional Strain-Hardening Ability in Nanocrystalline Ni-W Coatings through Compositionally Modulated Multilayer Approach
HT Padmaganesan, B Lavakumar, A Choshi… - Materials Science and …, 2024 - Elsevier
Nanocrystalline Ni-W coatings show exceptional strength; however, they exhibit poor
toughness due to limited ductility and high residual stresses which impede their use in …
toughness due to limited ductility and high residual stresses which impede their use in …
[HTML][HTML] Compressive mechanical properties of thermal sprayed AlCoCrFeNi high entropy alloy coating
Atmospheric plasma spraying (APS) was used to deposit an AlCoCrFeNi high entropy alloy
(HEA) coating on stainless steel substrate. The as-deposited coating was about 300 μm …
(HEA) coating on stainless steel substrate. The as-deposited coating was about 300 μm …
Vertically aligned laser sliced MWCNTs
TMD Alharbi, K Vimalanathan, IK Alsulami, CL Raston - Nanoscale, 2019 - pubs.rsc.org
Applications of multi-walled carbon nanotubes (MWCNTs) benefit from the availability of
specific lengths of the material while keeping the outer walls pristine, for example, for …
specific lengths of the material while keeping the outer walls pristine, for example, for …
Failure mechanisms in in-situ SEM micropillar compressions of pre-crystallized and crystallized zirconia-containing lithium silicate glass-ceramics
Microscale microstructure-property relations for zirconia-containing lithium silicate glass-
ceramics (ZLS) are critical for their applications as load-bearing restorations. This study …
ceramics (ZLS) are critical for their applications as load-bearing restorations. This study …