[HTML][HTML] Alloying design and microstructural control strategies towards developing Mg alloys with enhanced ductility

ZZ Jin, M Zha, SQ Wang, SC Wang, C Wang… - Journal of Magnesium …, 2022 - Elsevier
Nowadays, magnesium (Mg) alloys are promising lightweight structural materials, especially
in transportation and aerospace fields, due to their inherent low density and high specific …

[HTML][HTML] Anisotropy of wrought magnesium alloys: A focused overview

B Shi, C Yang, Y Peng, F Zhang, F Pan - Journal of Magnesium and Alloys, 2022 - Elsevier
In this paper, the relationship between anisotropic mechanical properties and the
corresponding microstructure evolution of wrought magnesium alloys is critically reviewed …

[HTML][HTML] Effect of circumferential strain rate on dynamic recrystallization and texture of Mg-13Gd-4Y-2Zn-0.5 Zr alloy during rotary backward extrusion

Y Meng, J Yu, G Zhang, Y Wu, Z Zhang, Z Shi - Journal of Magnesium and …, 2020 - Elsevier
Gleeble-3500 thermal simulator was applied to realize the rotary backward extrusion
forming of Mg-13Gd-4Y-2Zn-0.5 Zr (wt%) alloy at different circumferential strain rate from …

Breaking the limit of Young's modulus in low-cost Ti–Nb–Zr alloy for biomedical implant applications

T Lee, S Lee, IS Kim, YH Moon, HS Kim… - Journal of Alloys and …, 2020 - Elsevier
Biomedical implant material simultaneously requires high yield strength and low Young's
modulus. The lower boundary for the YM of Ti–13Nb–13Zr alloys is regarded to be …

[HTML][HTML] Anisotropic microstructural evolutions of extruded ZK60 Mg alloy subjected to electropulsing treatment

SJ Oh, J Yu, S Cheon, SH Lee, SY Lee, T Lee - Journal of Materials …, 2023 - Elsevier
Electropulsing treatment (EPT) has attracted attentions as an alternative to a conventional
furnace heat treatment (FHT). This study investigates the EPT effect on microstructural …

[HTML][HTML] Tailoring strength-ductility balance of caliber-rolled AZ31 Mg alloy through subsequent annealing

T Kong, BJ Kwak, J Kim, JH Lee, SH Park… - Journal of Magnesium …, 2020 - Elsevier
Recently, multi-pass caliber rolling has been shown to be effective for Mg alloys. This study
investigated the effect of subsequent annealing on the mechanical properties of a caliber …

[HTML][HTML] Enhanced prediction of anisotropic deformation behavior using machine learning with data augmentation

S Byun, J Yu, S Cheon, SH Lee, SH Park… - Journal of Magnesium and …, 2024 - Elsevier
Mg alloys possess an inherent plastic anisotropy owing to the selective activation of
deformation mechanisms depending on the loading condition. This characteristic results in a …

Effect on Zn on microstructures and mechanical properties of Mg–Gd–Y–Zn LPSO alloys

J Kim, H Liao, X Ou, Z Zhang, K Kang, T Lee… - Metals and Materials …, 2022 - Springer
In this study, the microstructures and mechanical properties of Mg–1Gd–1Y–x Zn alloys (x=
0.2, 0.4, 0.6, and 0.8) were investigated. Microstructural evolution was tracked during the …

Investigation of shear and tensile mechanical properties of ZK60 Mg alloy sheet processed by rolling and sheet extrusion

M Sabbaghian, N Fakhar, P Nagy, K Fekete… - Materials Science and …, 2021 - Elsevier
The microstructure, texture and mechanical behavior of two wrought ZK60 magnesium
alloys were investigated by tensile test and shear punch test (SPT). The samples processed …

Effect of substituting Y with Gd on LPSO phase dispersion and mechanical properties of Mg-2Ni-2Y alloy

Z Zhang, J Kim, T Lee, M Li, Y Gao, F Pan - Metals and Materials …, 2024 - Springer
The aim of this study was to substitute Y with Gd for Mg–2Ni–2Y alloy and investigate the
effect on the alloy's microstructures and mechanical properties. To achieve this purpose, the …