Statement of problem The comparative assessment of computer-aided design and computer-
aided manufacturing (CAD-CAM) technology and other fabrication techniques pertaining to …

Purpose To review methods used to investigate marginal adaptation of crowns and fixed
dental prostheses (FDPs), and to discuss testing variables employed and their influence on …

Al-12Si samples were fabricated by selective laser melting. Different processing parameters,
including four different hatch styles, as well as contour and base plate heating, were …

The evolution and development of CAD/CAM systems have led to the production of
prosthetic reconstructions by going beyond the use of traditional techniques. Precision …

STATEMENT OF PROBLEM: Advances in computer-aided design/computer-assisted
manufacturing (CAD/CAM) technology purportedly enhance the marginal fit of dental …

PURPOSE One of the most important factors in evaluating the quality of fixed dental
prostheses (FDPs) is their gap. The purpose of this study was to compare the marginal and …

Objectives. Digital impressions are increasingly used and have the potential to avoid the
problem of inaccurate impressions. Only a few studies to verify the accuracy of digital …

Statement of problem Information comparing the marginal and internal adaptation of single
metal copings fabricated via computer-aided design and computer-aided manufacturing …

Purpose The purpose of this in vitro study was to compare the marginal fit of zirconia
copings by using 2 different measurement methods: a triple optical scan method and a …

STATEMENT OF PROBLEM: Titanium is an alternative tooth restorative material because of
a its biocompatibility and mechanical properties. However, there is little information on the …