Suspension plasma spraying (SPS) and plasma spray-physical vapor deposition (PS-PVD)
are the only thermal spray technologies shown to be capable of producing TBCs with …

For more than 6 decades, thermal barrier coatings have been used to protect structural parts
in both stationary and aviation gas turbines. These coatings allow the use of significant …

Plasma spray-physical vapor deposition (PS-PVD), called the third-generation method for
thermal barrier coatings (TBCs) fabrication, has great potential for their using in gas-turbine …

As a novel processing technology, plasma spray-physical vapor deposition (PS-PVD)
enables coatings to be deposited mainly from vapor phase. To explore the potential …

Sintering is one of the key issues in the high temperature service of thermal barrier coatings
(TBCs), considering the continuously increasing operation temperature of gas-turbine for …

Columnar‐structured thermal barrier coatings (TBCs) manufactured by electron beam‐
physical vapor deposition (EB‐PVD) are well known to exhibit high strain tolerance …

In this work, 16 mol% CeO 2–4 mol% YbO 1.5 co-stabilized ZrO 2 (16Ce4YbSZ) coating was
prepared by atmospheric plasma spraying (APS). The phase structure, high temperature …

Abstract By Plasma Spray-Physical Vapor Deposition (PS-PVD), major fractions of the
powder feedstock can be evaporated so that the coating builds up mainly from vapor phase …

Abstract La 2 Ce 2 O 7 (LC) coatings were produced by plasma spray-physical vapor
deposition (PS-PVD). To achieve the quasi-columnar microstructure, three spray parameters …

The crystal orientations in YSZ coatings produced by electron-beam physical vapor
deposition (EB-PVD) were analyzed. Two different coatings have been prepared by distinct …