The Influence of SnO2 Nano-Particles Addition on the Vickers Microhardness of (Bi, Pb)-2223 Superconducting Phase
R Awad, AI Abou-Aly, MMH Abdel Gawad… - … of superconductivity and …, 2012 - Springer
Abstract The Vickers microhardness of Bi 1.6 Pb 0.4 Sr 2 Ca 2 Cu 3 O 10+ δ
superconducting phase with added SnO 2 nano-particles was investigated. The …
superconducting phase with added SnO 2 nano-particles was investigated. The …
Mechanical properties of (Cu0. 5Tl0. 5)-1223 added by nano-SnO2
NH Mohammed, AI Abou-Aly, IH Ibrahim… - Journal of alloys and …, 2009 - Elsevier
In this work, superconducting samples of type (Cu0. 5Tl0. 5)-1223 added by nano-SnO2 (0.0–
1.0 wt.%) were prepared by solid-state reaction technique. The prepared samples were …
1.0 wt.%) were prepared by solid-state reaction technique. The prepared samples were …
Effect of Er/Y addition on the growth and superconductivity of Bi2212 films
B Zhang, Y Qi - RSC advances, 2023 - pubs.rsc.org
In order to increase the critical current density of Bi2212 superconducting films to broaden
their application areas. A series of Bi2Sr2CaCu2O8+ δ–xRE2O3 (RE= Er/Y)(x= 0, 0.04, 0.08 …
their application areas. A series of Bi2Sr2CaCu2O8+ δ–xRE2O3 (RE= Er/Y)(x= 0, 0.04, 0.08 …
Effect of Nano-Oxides Addition on the Mechanical Properties of (Cu0.5Tl0.5)-1223 Phase
NH Mohammed, AI Abou-Aly, IH Ibrahim… - … of superconductivity and …, 2011 - Springer
In this study, superconducting samples of type Cu 0.5 Tl 0.5 Ba 2 Ca 2 Cu 3 O 10− δ,(Cu 0.5
Tl 0.5)-1223, added by SnO 2 and In 2 O 3 in nano-scale were prepared by a solid-state …
Tl 0.5)-1223, added by SnO 2 and In 2 O 3 in nano-scale were prepared by a solid-state …
Mechanical and Electrical Properties of (Cu0.5Tl0.5)-1223 Phase Added with Nano-Fe2O3
NH Mohammed, AI Abou-Aly, R Awad… - Journal of Low …, 2013 - Springer
Superconducting samples of type (Cu 0.5 Tl 0.5)-1223 added with nano-Fe 2 O 3 (x= 0.0,
0.1, 0.2, 0.4, 0.6 and 1.0 wt.%) were prepared by solid-state reaction technique. The …
0.1, 0.2, 0.4, 0.6 and 1.0 wt.%) were prepared by solid-state reaction technique. The …
Investigation on superconducting properties of GdBa2Cu3O7− δ added with nanosized ZnFe2O4
The effect of nanosized ZnFe 2 O 4, prepared by Co-precipitation method, on GdBa 2 Cu 3 O
7− δ superconductor was studied. Therefore, superconducting samples of type (ZnFe 2 O 4) …
7− δ superconductor was studied. Therefore, superconducting samples of type (ZnFe 2 O 4) …
Influence of Sr/Nd partial replacement on fundamental properties of Bi-2223 superconducting system
This comprehensive work aims to examine the change in flux pinning mechanism, physical,
mechanical, and structural characteristics of pure and Sr-site Nd-substituted Bi 1.8 Pb 0.35 …
mechanical, and structural characteristics of pure and Sr-site Nd-substituted Bi 1.8 Pb 0.35 …
Effect of Different Nanosized MgO on the Transport Critical Current Density of Bi1.6Pb0.4Sr2Ca2Cu3O10 Superconductor
NAA Yahya, R Abd-Shukor - Journal of Superconductivity and Novel …, 2014 - Springer
Magnesium oxide powders with average particle size 20 and 40 nm were added into Bi 1.6
Pb 0.4 Sr 2 Ca 2 Cu 3 O 10 (Bi, Pb-2223) with nominal composition Bi 1.6 Pb 0.4 Sr 2 Ca 2 …
Pb 0.4 Sr 2 Ca 2 Cu 3 O 10 (Bi, Pb-2223) with nominal composition Bi 1.6 Pb 0.4 Sr 2 Ca 2 …
Superconducting and Mechanical Properties of the Bulk (SnO2) x (Bi1.6Pb0.4)Sr2Ca2Cu3O10−δ Prepared at Different …
Solid-state reaction method was used to prepare superconductor samples with nominal
composition of (SnO 2) x (Bi 1.6 Pb 0.4) Sr 2 Ca 2 Cu 3 O 10− δ,(SnO 2) x (Bi, Pb)-2223 …
composition of (SnO 2) x (Bi 1.6 Pb 0.4) Sr 2 Ca 2 Cu 3 O 10− δ,(SnO 2) x (Bi, Pb)-2223 …
Preparation and electrical properties of Pb (Zr0. 52Ti0. 48) O3 thick films embedded with ZnO nanowhiskers by a hybrid sol–gel route
QL Zhao, MS Cao, J Yuan, WL Song, R Lu… - Journal of alloys and …, 2010 - Elsevier
Pb (Zr0. 52Ti0. 48) O3 thick films embedded with ZnO nanowhiskers (ZnOw–PZT) were
successfully prepared on Pt/Cr/SiO2/Si substrates by a hybrid sol–gel method via spin …
successfully prepared on Pt/Cr/SiO2/Si substrates by a hybrid sol–gel method via spin …