Ablation casting is an emerging sand casting technology that achieves high cooling rates in
a casting during its solidification, especially its eutectic solidification of the metal, resulting in …

The role of ablation casting process in the case of different thicknesses of a sloping pattern
of a near-eutectic Al-Si alloy was evaluated. The time durations for water spray were …

Emerging technological advances are reshaping the casting sector in latest decades.
Casting technology is evolving towards intelligent casting paradigm that involves …

Ablation sand casting is a new technology for casting aluminum alloys which helps to
achieve superior cooling trends during the solidification and results in eutectic …

In this research, the effects of cooling rate on the microstructure and mechanical properties
of 5182 aluminum alloy were investigated. Two plates were cast using conventional and …

High quality plate-shaped A356 plate castings, with length much greater than the feeding
distance, are difficult to make by conventional sand casting processes. This article describes …

Research published in open literature on ablation casting has been mainly experimental.
Modeling of this innovative technology is scarce. This article describes an initial attempt in …

Direct water spraying (DWS) is an approach similar to ablation casting using direct
impingement of water spray on the solidifying casting but is modified in that it no longer …

Because ablation differs from conventional casting, some conventional metallurgical
concepts, such as the relationship among secondary dendrite arm spacing (SDAS) …

Direct water cooling (DWC) application with the lost foam casting (LFC) process was
inspired by the ablation casting technique. Ablation casting is designed to combine the …