Martensitic transitions as a function of cold rolling strain levels, in the range of 5–43%, in the
solution treated condition of metastable β Ti-10V-2Fe-3Al (Ti-1023) alloy has been …

Stress-induced martensitic transformation (SIMT) during loading in metastable alloy systems
result in strength-ductility enhancement via transformation-induced plasticity (TRIP). The …

The work explores the phase transformation sequence and the kinetics of ω formation in a
novel metastable β titanium alloy of Ti–3Al–5Mo–7V–3Cr (wt%) through dilatometer test and …

Binary metal-metal composites are promising for advanced applications. In general, the
interface between adjacent metals may have a great influence on generation and …

Dual-phase metal materials can usually take into account the advantages of both phases,
but the heterogeneity of dual-phase properties will cause flow instability. Therefore, it is …

The constraint factor, C, defined as hardness, H, to the yield strength, σ y, ratio, is an indirect
measure of the pressure sensitivity in materials. Previous investigations determined that …

The present study focuses on modifying the microstructures and mechanical properties of a
recently developed metastable β Ti–5Al–5V–5Mo–3Cr (Ti-5553) alloy through cold rolling …

In the present study, the Ti-41Nb (wt.%) alloy featuring a microstructure composed of β and α
″phases have been prepared through the application of the Cross Rolling (CSR) technique …

In this study, TiC0. 5N0. 5 nanoparticles (NPs) are shown to induce a remarkable grain
refinement of aluminum at various cooling rates. The grain refinement mechanisms are …

In the present work, Ti-15V-3Cr-3Al-3Sn (Ti-15333) samples were solution annealed (SA) at
two different temperatures (800° C for 30 minutes and 1000° C for 15 minutes) to investigate …