There are several facets of aluminum when it comes to sustainability. While it helps to save
fuel due to its low density, producing it from ores is very energy-intensive. Recycling it shifts …

Compared to most thermomechanical processing methods, friction stir welding (FSW) is a
recent technique which has not yet reached full maturity. Nevertheless, owing to multiple …

During solidification of many so-called high-performance engineering alloys, such as 6000
and 7000 series aluminum alloys, which are also unweldable autogenously, volumetric …

The microstructure and precipitates within selectively laser melted (SLM) AlSi10Mg alloys in
the as-built state and after T6 heat treatment were examined and correlated to the hardness …

The study looks into the impact of thermal post-processing using Hot Isostatic Pressing
(HIPping) and/or T6-peak aging treatment, post-process machining, as well as the build …

Samples with one through three passes with 100% overlap were created using friction stir
processing (FSP) in order to locally modify the microstructural and mechanical properties of …

The main task of this work was to study the influence of the cooling conditions after
homogenization of the 6082 aluminium alloys. The effect of the solution heat treatment …

This study introduces new alloys, which combine the age-hardening capability of Al-Mg-Si
alloys with the microstructure-controlling effect on processing of primary Fe-rich intermetallic …

The strength‐to‐weight ratio offered by AA6XXX alloys and their enhanced mechanical
properties have become crucial criteria for their use in light weight military vehicles, rockets …

An homogenisation process is applied to as cast billets Al–Mg–Si alloys in order to improve
the extrudability. During this homogenisation, plate-like β-AlFeSi phase transforms to a more …