Effect of cobalt addition to NASICON-type Li1. 3Al0. 3Ti1. 7 (PO4) 3 (LATP) on its sintering behavior and electrical properties
Co ions as a sintering aid were electrostatically adsorbed on the surface of negatively-
charged NASICON-type solid electrolyte Li 1.3 Al 0.3 Ti 1.7 (PO 4) 3 (LATP) particles using …
charged NASICON-type solid electrolyte Li 1.3 Al 0.3 Ti 1.7 (PO 4) 3 (LATP) particles using …
Improving the Safety of HED LIBs by Co-Coating Separators with Ceramics and Solid-State Electrolytes
T Zhang, B Wang, X Qi, Z Chang, R Wang… - Energy Material …, 2024 - spj.science.org
Internal short circuits because of deformation or melting down of separators have been
recognized as a root cause for many thermal runaway (TR) events of high-energy-density …
recognized as a root cause for many thermal runaway (TR) events of high-energy-density …
Structural Analysis of the LiCoPO4 Electrode/NASICON-Type Li1.3Al0.3Ti1.7(PO4)3 Solid Electrolyte Interface
F Ichihara, K Niitsu, Y Tanaka, Y Niwa… - The Journal of …, 2023 - ACS Publications
The mixed composites of a high-voltage cathode material in lithium-ion batteries, LiCoPO4
(LCP), and an oxide-based solid electrolyte, Li1. 3Al0. 3Ti1. 7 (PO4) 3 (LATP), were sintered …
(LCP), and an oxide-based solid electrolyte, Li1. 3Al0. 3Ti1. 7 (PO4) 3 (LATP), were sintered …
Investigating the safety of solid/liquid hybrid electrolyte lithium-ion battery: A comparative study with traditional LIBs under abuse condition
Lithium-ion battery (LIB) with solid‒liquid hybrid electrolyte is an important milestone in the
development of all-solid-state battery (ASSB) to achieve higher energy density. In-depth …
development of all-solid-state battery (ASSB) to achieve higher energy density. In-depth …
Influence of Cobalt Introduction on the Phase Equilibrium and Sintering Behavior of Lithium-Ion Conductor Li1.3Al0.3Ti1.7(PO4)3
After the reported high sinterability of a NASICON-type lithium-ion conducting electrolyte Li1.
3Al0. 3Ti1. 7 (PO4) 3 (LATP) in contact with LiCoPO4, which was found in the studies on a …
3Al0. 3Ti1. 7 (PO4) 3 (LATP) in contact with LiCoPO4, which was found in the studies on a …
Low-temperature sintering of Li1. 3Al0. 3Ti1. 7 (PO4) 3 electrolytes enabled by cobalt surface modification followed by two-step sintering
All-solid-state Li-ion batteries, in which all components, such as the electrolytes and active
materials are made of solid materials, can be safer than conventional liquidbased batteries …
materials are made of solid materials, can be safer than conventional liquidbased batteries …
Design of highly-sinterable LATP-CNT composite powder by sequential particle assembly for fabrication of highly electrical-conductive composite electrodes
A sequential particle assembling process was developed to fabricate composite particles
with multiple components. Cobalt sintering aids and carbon nanotube (CNT) conductive …
with multiple components. Cobalt sintering aids and carbon nanotube (CNT) conductive …
LAGP solid-state electrolyte for electric double layer gating of In2O3 field-effect transistors
J Liu, J Wang - … Conference on Energy System, Electricity, and …, 2024 - spiedigitallibrary.org
Solid electrolyte is a new kind of material which has been widely used in battery field in
recent years. In recent years, due to the extensive progress of battery technology, various air …
recent years. In recent years, due to the extensive progress of battery technology, various air …
Surface modification of Li3PO4 to Li1. 3Al0. 3Ti1. 7 (PO4) 3 by wet chemical process and its sintering behavior
The surface modification of lithium phosphate on lithium alumina titanium phosphate (LATP)
by a wet chemical method densified the LATP to over 90% at a sintering temperature of 800 …
by a wet chemical method densified the LATP to over 90% at a sintering temperature of 800 …