A new approach for the determination of technological parameters for hydroabrasive cutting of materials: Ein neuer Ansatz zur Ermittlung der technologischen …
Es wird ein Verfahren für den Entwurf einer Technologie für das Wasserstrahlschneiden von
Materialien vorgestellt, das auf der Bestimmung der Konstanten der Schneidbarkeit von …
Materialien vorgestellt, das auf der Bestimmung der Konstanten der Schneidbarkeit von …
Mechanism of creating the topography of an abrasive water jet cut surface
The development and application of new materials brings, in connection with their
technological machining, a number of new questions. Classical methods of machining are …
technological machining, a number of new questions. Classical methods of machining are …
Study of the influence of the structural grain size on the mechanical properties of technical materials
The mechanical properties of technical materials depend on their structure. They are
influenced not only by their chemical composition, but particularly by the structural grain …
influenced not only by their chemical composition, but particularly by the structural grain …
Predicting residual and flow stresses from surface topography created by laser cutting technology
The paper deals with the engineering method for laser cutting technology that utilizes stress
equations derived from surface topography for determining residual stresses. It presents an …
equations derived from surface topography for determining residual stresses. It presents an …
Structural and Mechanical Changes of AlMgSi0.5 Alloy during Extrusion by ECAP Method
SPD (several plastic deformations) methods make it possible to obtain an ultrafine-grained
structure (UFG) in larger volumes of material and thus improve its mechanical properties …
structure (UFG) in larger volumes of material and thus improve its mechanical properties …
Analysis and comparison of production parameters of additive technologies in the construction of objects based on metals using the ADAM and SLM methods
V Bechný, A Czán, J Holubják, T Czánová… - AIP Conference …, 2023 - pubs.aip.org
The research deals with innovative technologies and an additive process based on metals
in mechanical engineering. Two methods of additive production were applied in the solution …
in mechanical engineering. Two methods of additive production were applied in the solution …
A New Method of Predicting the Structural and Mechanical Change of Materials during Extrusion by the Method of Multiple Plastic Deformations
The formulation of the Hall–Petch relationship in the early 1950s has raised immense
interest in studying the influence of the grain size of solid materials on their properties. Grain …
interest in studying the influence of the grain size of solid materials on their properties. Grain …
Contribution to the thermal properties of selected steels
Sažetak The paper deals with the influence of structural changes on heat transport
phenomena of steels samples. Three samples of 10GN2MFA steel were thermally treated at …
phenomena of steels samples. Three samples of 10GN2MFA steel were thermally treated at …
Implementation of a recycled Polypropylene homopolymer material for use in Additive Manufacturing
The main objective of the presented scientific article is to define the mechanical properties of
polypropylene homopolymer with a prescribed percentage ratio of recycled granulate. The …
polypropylene homopolymer with a prescribed percentage ratio of recycled granulate. The …
Evaluation of fatigue life of steel using steel grain size: Evaluation der Ermüdung von Stahl in Abhängigkeit der Korngröße
R Owsiński, S Kamiński, M Szymaniec… - Materialwissenschaft …, 2015 - Wiley Online Library
The insightful discussion of the relationship between the construction of metallographic and
fatigue life and proposition of mathematical relationships describing this relationship was …
fatigue life and proposition of mathematical relationships describing this relationship was …