Many systems require very high heat removal rates in small areas due to the increase in
their packing density, such as power electronics. These systems need to be cooled to …

A heat sink is a specific type of heat exchanger integrated with heat generating devices-
mostly electronics-for the sake of thermal management. In the design procedure of heat …

The paper describes experimental work to assess the effect of inlet subcooling on the flow
boiling characteristics of HFE-7200 in a multi-microchannel heat sink. The experiments were …

Due to their unique heat transfer features, graphitic foams have been used in the current
analysis to form heat sinks effective enough to dissipate extreme heat generated within high …

Over the last two decades, the dimensions of electromechanical systems have decreased to
micro, even nano scale, as well as the capacity of these systems has increased, leading to …

Recently, the thermal management of power electronic converters has gained significant
attention due to the continuous trend of developing very compact power electronic …

Cross-section profiles of micro pin-fins (MPFs) have significantly affected the overall heat
transfer performance in natural and forced convection through passive and active cooling …

Since the control of liquid nitrogen (LN2) jet cooling plays an important role during cryogenic
machining, especially for the through-tool cooling method, the characteristics of the surface …

Cooling by water spray is a well-known technology that can reach significantly higher
Critical Heat Flux (CHF) compared to other cooling methods. For the light water reactor …

Spray cooling today is one of the most effective methods for high heat flux application. Since
there are numerous factors influencing the heat transfer in spray cooling, some issues …