Purpose–The purpose of this paper is to make people aware of the increase usage of laser
system in surface texturing process. Design/methodology/approach–As it is a brief review …

In this work, carbon steel surface was coated with Al 2 O 3–40 wt% TiO 2 composite using
thermal spraying method. The tribological properties of the plasma-sprayed Al 2 O 3–40 wt …

With good combination of hardness, ductility, and wear resistance, TiO 2 coatings are one of
the most potential hard ceramic coatings. TiO 2 in an Al 2 O 3 coating had increases the …

Corrosion is the deterioration of materials by chemical interaction with their environment. In
the oil and gas industry, corrosion of the pipelines and other equipment is one of the leading …

Commercially available austenic stainless steel substrate was coated with commercially
available, raw Al 2 O 3 powder applied by means of plasma spraying method and then re …

Three kinds of alumina–titania composite powders with different microstructure were plasma
sprayed to prepare alumina–titania coatings. The influence of composite powders' …

The nanostructured and two conventional alumina–titania coatings were deposited by
atmospheric plasma spray. The presented studies show that nanoparticles are the …

Abstract Al 2 O 3-40 wt% TiO 2 (AT40) coating is a low-cost and widely applied ceramic
coating. In this article, the phase distribution, micro-hardness and wear mechanism, as well …

A micro-grooved texture was fabricated on the surface of a plasma sprayed alumina-13%
titania (Al 2 O 3-13% TiO 2) coating using laser surface texturing (LST) method. Aspects of …

Like other manufacturing processes, plasma spraying also has a non-linear behavior due to
contribution of many coating parameters. This characteristic makes finding optimal factor …