Based on the fact that titanium and titanium alloys have poor fretting fatigue resistance and
poor tribological properties, it is necessary to apply some surface engineering methods in …

Lasers have been used to improve the ultimate performance of thermal spray coatings for
specific applications, but the full potential of additional laser treatments must be further …

摘要激光表面熔覆制备纳米结构涂层是一种新型的纳米表面涂层技术. 综述了国内外近年来激光
熔覆制备纳米结构涂层的研究进展. 从熔覆对象的角度介绍了激光熔覆制备纳米结构涂层的主要 …

St37 steel, widely used in many engineering applications, experiences significant losses in
its mechanical and physical properties over time due to reasons such as corrosion or wear …

In this paper, the ultrasound-assisted sealing with aluminum phosphate and silicone resin
was used to fill the pores in the subsonic plasma sprayed nanostructured Al 2 O 3-13TiO 2 …

The remelting method is introduced to improve the properties of the as-sprayed NiCrBSi
coatings. In this work, tungsten carbide (WC) was selected as reinforcement and the as …

Plasma sprayed nanostructured coatings were successfully fabricated on a titanium alloy (Ti–
6Al–4V) substrate using the as-prepared nanostructured Al2O3–13wt% TiO2 feedstock. A …

Commercially available austenic stainless steel substrate was coated with commercially
available, raw Al 2 O 3 powder applied by means of plasma spraying method and then re …

Titanium composite coatings have been fabricated by laser cladding with a mixed powder of
TiAlSi and Al 2 O 3–13% TiO 2 on Ti–6Al–4V alloy substrates. The effects of different content …

Plasma sprayed nanostructured Al2O3–13wt.% TiO2 coatings were fabricated on a Ti–6Al–
4V alloy using as-prepared feedstock. The as-sprayed coatings were remelted by a CO2 …