XPS for non-destructive depth profiling and 3D imaging of surface nanostructures
S Hajati, S Tougaard - Analytical and bioanalytical chemistry, 2010 - Springer
Depth profiling of nanostructures is of high importance both technologically and
fundamentally. Therefore, many different methods have been developed for determination of …
fundamentally. Therefore, many different methods have been developed for determination of …
Investigating the structure of the oxide on Ni‐Cr‐Mo alloys while presenting a method for analysis of complex oxides using QUASES
AM Morgan, JD Henderson, BA Kobe… - Surface and …, 2023 - Wiley Online Library
X‐ray photoelectron spectroscopy (XPS) is a technique that is widely used to study thin
oxide films because of its extremely high surface sensitivity. Utilizing the QUASES …
oxide films because of its extremely high surface sensitivity. Utilizing the QUASES …
Oxide layer growth on nickel-base alloy surfaces in high temperature water and in O2 studied by ToF-SIMS with isotopic tracers
S Voyshnis, A Seyeux, S Zanna, B Martin-Cabanas… - Corrosion …, 2018 - Elsevier
Alloy 600 oxidation in high temperature water was investigated by ToF-SIMS. The passive
layer formed is duplex with an inner oxide that evolves from Cr 2 O 3 towards NiCr 2 O 4 with …
layer formed is duplex with an inner oxide that evolves from Cr 2 O 3 towards NiCr 2 O 4 with …
Volatilization and transport mechanisms during Cr oxidation at 300 C studied in situ by ToF-SIMS
The oxidation of chromium at 300° C was investigated in situ by ToF-SIMS for three different
oxygen pressures (P_ O _ 2= 2.0 * 10^-7 PO 2= 2.0× 10-7, 6.0× 10− 7 and 2.0× 10− 6 mbar) …
oxygen pressures (P_ O _ 2= 2.0 * 10^-7 PO 2= 2.0× 10-7, 6.0× 10− 7 and 2.0× 10− 6 mbar) …
Effects of alloying on oxidation and dissolution corrosion of the surface of γ-Fe (111): a DFT study
C Han, C Zhang, X Liu, H Huang, S Zhuang… - Journal of molecular …, 2015 - Springer
Abstract Effects of alloying elements in popular steels on the oxidation and dissolution
corrosion of the surface of γ-Fe (111) have been investigated by performing density …
corrosion of the surface of γ-Fe (111) have been investigated by performing density …
[HTML][HTML] Towards detailed combustor wall kinetics: An experimental and kinetic modeling study of hydrogen oxidation on Inconel
Gas-phase hydrogen combustion is ubiquitous in industrial processes, and the associated
surface kinetics on heat-resistant alloys plays a crucial role in designing efficient low-carbon …
surface kinetics on heat-resistant alloys plays a crucial role in designing efficient low-carbon …
Grain orientation dependent Nb–Ti microalloying mediated surface segregation on ferritic stainless steel
Surface segregation and oxide formation anisotropy on Ti–Nb stabilized ferritic stainless
steel (EN 1.4521) were studied by XPS and Electron Backscatter Diffraction. Competitive …
steel (EN 1.4521) were studied by XPS and Electron Backscatter Diffraction. Competitive …
Influence of precipitation on initial high-temperature oxidation of Ti–Nb stabilized ferritic stainless steel SOFC interconnect alloy
H Ali-Löytty, P Jussila, T Juuti, LP Karjalainen… - international journal of …, 2012 - Elsevier
Oxidation phenomena on Laves phase forming Ti–Nb stabilized ferritic stainless steel (EN
1.4509) were studied at 650° C by electron microscopic and electron spectroscopic …
1.4509) were studied at 650° C by electron microscopic and electron spectroscopic …
Optimization of the electrical properties of Ti–Nb stabilized ferritic stainless steel SOFC interconnect alloy upon high-temperature oxidation: The role of excess Nb on …
H Ali-Löytty, P Jussila, M Valden - International journal of hydrogen energy, 2013 - Elsevier
Interfacial oxidation of Nb and Si at 650° C on Laves phase forming Ti–Nb stabilized ferritic
stainless steel (Fe–19Cr–0.9 Si–0.2 Nb–0.1 Ti (at.%), grade EN 1.4509) was studied by …
stainless steel (Fe–19Cr–0.9 Si–0.2 Nb–0.1 Ti (at.%), grade EN 1.4509) was studied by …
Seal glass compatibility with bare and (Mn, Co) 3O4 coated Crofer 22 APU alloy in different atmospheres
MK Mahapatra, K Lu - Journal of Power Sources, 2011 - Elsevier
To prevent gas mixing and leakage during solid oxide fuel/electrolyzer cell operation, the
interconnect/seal glass interface should bond well and remain stable. A SrO–La2O3–Al2O3 …
interconnect/seal glass interface should bond well and remain stable. A SrO–La2O3–Al2O3 …