The utilization of various conventional and emerging solid adsorbents is an attractive carbon
capture method for post‐combustion and direct air capture (DAC). This review aims to …

Characterization of zeolite membrane defects including SEM, dye permeation, bubble point
and permporometry methods are presented. Experimental setup, governing equations and …

Aligned multi-walled carbon nanotubes (30–130 μm long, 10–200 nm outer diameter) have
been prepared in high yield by pyrolysing homogeneously dispersed aerosols generated …

Microwave assisted pyrolysis of high density polyethylene (HDPE) using a reactor bed of
catalytic activated carbon produces a condensed liquid product with a carbon chain length …

A macromolecular model with formula C 60468 H 2193 O 527 N 468 S 49 was constructed
for Pingyao coke by using microstructural characteristics and theoretical calculations. The …

Catalyst precursors composed of Ni/Mg/Al oxides with added La and Ce were tested in
ethanol steam reforming (ESR) reactions. La and Ce were added by anion-exchange. The …

Two activated carbons of different texture were modified by carbon deposition from the
pyrolysis of benzene, in an attempt to obtain carbon molecular sieves of high adsorption …

Tar removal performance of dolomite and commercial precious metal based steam
reforming catalyst have been investigated by using the surrogated compounds of tar, namely …

Ni catalysts supported on MgOsingle bondSiO 2 were assessed in the steam reforming
reaction of glycerol for the study of the H 2 production and carbon deposition with different …

Cobalt catalysts were prepared on supports of SiO2 and γ-Al2O3 by the impregnation
method, using a solution of Co precursor in methanol. The samples were characterized by …