The corrosion behavior of shiny and dull spangle on a batch hot-dip galvanized Zn-0.05 Al-
0.2 Sb coating in an aerated 3.5 wt.% NaCl solution was evaluated by potentiodynamic …

A rotating disk electrode technique is used to investigate the kinetics and mechanism of O2
reduction as it occurs at the surface of various hot-dip Al–Zn alloy coatings (on steel) …

The applicability of galvanized products in various industries has increased the demand for
highly corrosion-resistant coatings to counter harsh environments. Among these, Zn–Mg–Al …

The reaction between solid steel and liquid Al–Zn–Si alloy leads to formation of a solid
intermetallic interfacial layer. In the case of industrial Al–43.5 Zn–1.5 Si coated steel strips …

The removal of iron-containing dross particles and recovery of zinc from galvanizing dross
by super-gravity separation was investigated using a model Zn–Fe–Al alloy. After super …

The corrosion resistance of galvanized coatings is essential for improving the performance
of steel structures. Coating quality is strongly influenced by several parameters, including …

The removing of suspended dross in galvanized zinc is the key point to obtain defect free
coatings and inhibit the generation of solid wastes including surface and bottom dross which …

Development of hot dip zinc coated sheets in new applications increased demand for
production of high quality galvanized coatings, but the presence of surface defects reduces …

The dross generated in the hot-dip Zn–Al–Mg coating process is a valuable co-product,
since it contains high quantities of recyclable alloy. A new method to recover Zn–Al–Mg alloy …

Segregation of aluminum and antimony of spangles on a batch hot-dip galvanized Zn-0.05
Al-0.2 Sb coating were investigated by scanning electron microscopy (SEM) in …