The ultimate tensile strength (UTS) and the yield strength (YS) are two key performances of
copper wire, which vary synergistically under macroscopic conditions. However, they exhibit …

Over the past decade, cold spray (CS) process quickly emerges as an attractive additive
manufacturing technology to fabricate individual components along with repairing damaged …

The periodicity and density of atomic arrangement vary with the crystal orientation, which
results in different deformation mechanisms and mechanical properties of γ-TiAl. In this …

This study focuses on the evaluation of the crystal structure perfection in the single crystal
made of CMSX-4 nickel superalloy and its effect on creep resistance. Single crystal castings …

The paper overviews the use of operando studies to characterise materials deformation at
multiple scales reaching down to (sub) micron resolution. Within the range of techniques …

In this paper, the discrete dislocation dynamics (DDD) framework for single crystal nickel-
based superalloys (SCNBSs) modeling is extended to simulate the superdislocation pairs …

The deformation of polycrystalline metallic materials is highly heterogeneous, originating
from the anisotropic elastic and plastic properties of individual grains. Plastic deformation is …

Selective Laser Sintering (SLS) is an additive manufacturing technique in which thin layers
of fine powder are fused by selective sintering with a high-powered laser to create a 3D part …